Interior decoration of the loggia lining

Nowadays, many families decide to sheathe a balcony lining. And this is understandable, because the lining is not only very convenient and practical, but also beautiful.

This material is made of natural wood and plastic. Each species has its pros and cons of. It is best to install plastic casing on the balcony, since it is not afraid of moisture and is very easily laundered from dust and dirt. If you have a glazed balcony, then you can use wooden panels.

Working with this material is satisfied with a simple one, although it requires attention and accuracy. So, how to sheathe the balcony lining yourself?

one. First you need to free the balcony from the things there (if any), nothing should interfere with your work. It is best to glaze the balcony, so as not to depend on nature and possible precipitation in the form of rain and snow that can get into the room and harm your property.

2. After releasing the balcony, you should begin measurements. It is necessary to measure everything from the floor and ending with the ceiling. Pay special attention to angle measurements. Then you need to calculate the total area and add about 15 percent of the total area in the score of the material. Additionally, the amount of material that will be needed for the manufacture of the frame and the number of fasteners should be calculated. So — if you simultaneously decide to make the insulation of the loggia with your own hands, you need to calculate the amount of insulation.

3. One of the most pleasant and easy moments is the choice and purchase of the lining. A large selection of material of different sizes made in different color schemes is provided on the market. And each person will be able to choose exactly what he needs.

four. After all preparatory work has been carried out, you can proceed directly to the installation. First you need to cut wooden rails, they should be a little already width of the wall. On a wooden rail, at a distance of 50 centimeters, you need to drill small openings for dowels.

5. Using a perforator and dowels, beat the racks to the wall at a distance from each other about 40-50 centimeters.

6. The frame is ready, now you should proceed to install the corners, which should also be prepared in advance, cutting in size and nail to the wall.

7. We begin to install the lining. You need to start the skin from the walls, then the ceiling. Particular attention should be paid to the installation of the first PVC panel so that further stripes are located at an even angle. The last strip will need to be cut not only in length, but also in width.